Representing receiver level excesses in 3D view
By default, when a receiver has level limits assigned in a CadnaA project, when these limits are exceeded the receiver symbol is represented in red.
In order for the receiver symbol to also be represented in red in 3D view, it is necessary to edit the paragraphOptions | Appearance | 3D tab | Diffuse colorby means of the formulaiif(EXCEEDED, rgb(255.0.0), rgb(0.0))
Related Articles
Represent "Text box" in 3D view
To represent one or more "Text box" in 3D view, the variable must be addedDisplay3Din theWindow-Memoof each Text box and assign it the value 1.Calculate and Export Partial Level Table by Eighth Bands
Let us assume the following scenario in the there are 2 point sources, with the sound power spectrum allocated, 3 receivers and a calculation area around all the elements to be included in the calculation of partial levels: Then access the ObjectTree ...Manual adjustment of the generator level before executing measurements of a Path Signal
When the APx500 software is handled within each Signal Path of each sequence, a Prompt can be added that allows you to manually adjust the level of the generator before the selected measurements are started within that. To do this, the following ...Calculate the noise level in enclosures when it comes from other enclosures
This example defines the spectrum of a custom noise source located in a particular enclosure, in order to calculate the levels received in the adjacent enclosures. 1) Draw the plan of the next building on one floor and assign the different ...CadnaR License Configuration Recommendations
Below we propose recommended configurations of CadnaR software, depending on different areas of application: CadnaR & options CAL + VIS + ORG + AUDIO Complete package for all areas of application and general use.Recommended for acoustics experts, as ...