Difference between Mass of a Wall and Flanking Mass
The mass value of a wall is only different from that of flanking mass when the behaviour of the constructive solution within the flanking path is different: Heavy Double Walls.
Related Articles
What is a "double wall" of?
A "double wall" consists of two layers of heavy wall. In other words, it consists of 2 layers of heavy wall (concrete/brick).
Side broadcasts: how Insul design affects in SONarchitect
When a separator element is designed inInsullateral transmissions shall be calculated in one way or another in SONarchitect based on the configuration of the"double wall" and "light element". If a coated wall is added, the complete system will be ...
Importation of "Suspended ceilings" from Insul
FromInsuldirect exports of suspended ceilings cannot be made and subsequently imported intoSONarchitect. What needs to be done is calculated withInsulthe index of improving sound insulation provided by the suspended ceiling, calculating the ...
Overlap the DUT Frequency Response at different generator levels
In this article we will explain how to simultaneously measure and visualize the frequency response of a DUT (Device Under Test) for different generator output levels of our Audio Precision analyzer. 1) After programming the Signal Path Setup within ...
Particle visualization
In CadnaR it is possible visualize the spread of particles excited by the different sources, provided that the 'Particles' or 'Image' calculation method is configured. In addition, it is necessary to activate the "Enable Particle Viewing" field in ...